Tail Feather Camper Australia
  • Home
  • About
  • Features
  • Gallery
  • Contact
  • Support
    • Trailer Specs
    • Trailer FAQ
    • Assembly Instructions
  • Blog

TAIL FEATHER DIY KIT

The Tail Feather DIY Kit is designed for those who want to assemble the Tail Feather on their own trailer, or use it in the backyard as a shelter assembled on the ground or raised platform. There are four kits to choose from, each kit contains the necessary components to build a Tail Feather Camper or Shelter.

The only tool you need to assemble the kit is an electric phillips head screw driver. First time assembly may take a few hours, but with practice, two people should be able to assemble the kit in less than 60 minutes. It's even quicker to dismantle. Each part weighs 9 kg or less so they're easy to handle. Assembly instructions are available for download here.
Picture
TAIL FEATHER 10 INTERNAL FURNISHINGS
Picture
TAIL FEATHER 10 SHELL COMPONENTS

TAIL FEATHER 8
REAR DOOR

Picture
10 x Wall Panels
(4 push out windows with insect screen)
(2 with fixed windows)

2 x Corner Panels

2 x Roof Sections (fully insulated) with:
2 sky lights
2 roof vents and
2 LED lights






1 x Double Door Assembly

2 x Doors
(with a fixed window in each)

Dinette that converts to an 1870 x 1440 mm double bed
Includes: 2 x Bench Seats, 1 x Table & 1 x Cushion Set

1 x Counter top with sink and manual pump
(with under bench storage & 15 litre water reservoir)




1 x Canvas hanging 3-shelf cabinet



1 x Floor Liner

1 x Marine Carpet

1 x Safety Strap

1 x Hardware Kit 
(screws, washers and 
roof tie down clips)

4 x Curtains

4 x Sun Shields

1 x 4 metre cable with light switch and cigarette plug

TAIL FEATHER 8 
SIDE DOOR

Picture
10 x Wall Panels
(4 push out windows with insect screen)
(2 with fixed windows)

4 x Corner Panels

2 x Roof Sections (fully insulated) with:
2 sky lights
2 roof vents and
2 LED lights




1 x Roof Extension (127 mm)

1 x Single Door Assembly

1 x Door
(with a fixed window)

Dinette that converts to an 1870 x 1440 mm double bed
Includes: 2 x Bench Seats, 1 x Table & 1 x Cushion Set

1 x Counter top with sink and manual pump
(with under bench storage & 15 litre water reservoir)




1 x Canvas hanging 3-shelf cabinet



1 x Floor Liner

1 x Marine Carpet

1 x Safety Strap

1 x Hardware Kit 
(screws, washers and 
roof tie down clips)

4 x Curtains

3 x Sun Shields

1 x 4 metre cable with light switch and cigarette plug

TAIL FEATHER 10
REAR DOOR

Picture
12 x Wall Panels
(4 push out windows with insect screen)
(2 with fixed windows)

2 x Corner Panels

2 x Roof Sections (fully insulated) with:
2 sky lights
2 roof vents and
2 LED lights

1 x Roof Extension with 1 LED light (540 mm wide)



1 x Double Door Assembly

2 x Doors
(with a fixed window in each)

Dinette that converts to an 1870 x 1440 mm double bed
Includes: 2 x Bench Seats, 1 x Table & 1 x Cushion Set

1 x Counter top with sink and manual pump
(with under bench storage & 15 litre water reservoir)

1 x Counter top without sink
(with under bench storage)

1 x Canvas hanging 3-shelf cabinet

1 x Canvas hanging wardrobe

1 x Floor Liner

1 x Marine Carpet

1 x Safety Strap

1 x Hardware Kit 
(screws, washers and 
roof tie down clips)

4 x Curtains

4 x Sun Shields

1 x 4 metre cable with light switch and cigarette plug

TAIL FEATHER 10
SIDE DOOR

Picture
12 x Wall Panels
(4 push out windows with insect screen)
(2 with fixed windows)

4 x Corner Panels

2 x Roof Sections (fully insulated) with:
2 sky lights
2 roof vents and
2 LED lights

1 x Roof Extension with 1 LED light (540 mm wide)

1 x Roof Extension (127 mm)

1 x Single Door Assembly

1 x Door
(with a fixed window)

Dinette that converts to an 1870 x 1440 mm double bed
Includes: 2 x Bench Seats, 1 x Table & 1 x Cushion Set

1 x Counter top with sink and manual pump
(with under bench storage & 15 litre water reservoir)

1 x Counter top without sink
(with under bench storage)

1 x Canvas hanging 3-shelf cabinet

1 x Canvas hanging wardrobe

1 x Floor Liner

1 x Marine Carpet

1 x Safety Strap

1 x Hardware Kit 
(screws, washers and 
roof tie down clips)

4 x Curtains

3 x Sun Shields

1 x 4 metre cable with light switch and cigarette plug

SITE
Home
About
Features
Gallery
Support
Contact
Blog
SUPPORT
Trailer Specifications
Trailer FAQs
Assembly Instructions
Warranty
Picture
Authorised Australian Dealer: Micky Booth RV 
14 Eugene Terrace, Ringwood VIC 3134 | 0425 857 866 | info@mickybothRV.com.au | mickyboothRV.com.au