TAIL FEATHER 10.0

The Tail Feather 10.0 Drive Away Camper is 540 mm (21") longer than the Tail Feather 8.0, and consists of an extra wall panel on each side, plus a 540 mm roof extension. This camper has that little extra room, especially if you're going away for more than a weekend. Like the Tail Feather 8.0, the 10.0 can also be used as a motorbike or ATM trailer.

TAIL FEATHER 10.0 
DIY KIT INCLUSIONS

12 x Wall Panels
(4 push out windows with insect screen)
(2 with fixed windows)

2 x Corner Panels

2 x Roof Sections

1 x Roof Extension
(540 mm wide)

1 x Rear Door Assembly

2 x Doors
(with a fixed window in each)

Dinette that converts to a
1440 mm x 1870 mm double bed
Includes: 2 x Benches with
under seat storage, 1 x table &
1 x cushion set


1 x Bench top with sink and faucet
(with under bench storage)

1 x Bench top without sink
(with under bench storage)

1 x Canvas hanging shelf

1 x Canvas hanging wardrobe

3 x LED ceiling lights

2 x Sky lights

2 x Roof vents

TAIL FEATHER 10.0 
OPTIONAL EXTRAS

Dinette that converts to two single
beds or one king size bed
Singles 580 mm x 1980 mm
King 1870 mm x 1980 mm

Inner spring mattress upgrade

Outside rear or "L" shaped awning
(with or without attachable walls)

 Magnetic insect screen attached
to rear door opening

Curtains

Sun Shields available on fixed windows

Marine Carpet

1 x 240 volt inlet

1 x Double power point

1 x Fire Extinguisher

FLOOR PLANS

SEATING FLOOR PLAN

With the table in the up position, the camper can comfortably seat four adults. The table is free standing and can be easily removed for use outdoors.

SLEEPING FLOOR PLAN

The table legs are folded and the table is placed between the benches to make a 1440 mm wide by 1870 mm long bed.