Tail Feather Camper Australia
  • Home
  • About
  • Features
  • Gallery
  • Contact
  • Support
    • Trailer Dimensions
    • Trailer FAQ
    • Assembly Instructions

TAIL FEATHER 8.0

Our lightest and most compact Drive Away Camper is an ideal weekend getaway camper for two. It's fully insulated, lightweight, and can be towed by most four cylinder cars. The Tail Feather 8.0 can be left on the trailer permanently, or dismantled and stored away when not in use.  When assembled on the ground or raised platform your Tail Feather 8.0 becomes a stand alone shelter, perfect in the backyard as a teenage retreat or spare bedroom for visitors.  

The Tail Feather 8.0 comes with two rear opening doors, making it suitable to be used as a lockable motorbike or quad bike trailer. Once you get to your destination pull out your bike, and the Tail Feather converts to a camper in minutes. The internal "flat pack" furnishings are modular, and can be moved around the camper to suit yourself.
Picture
Dinette, bench top with sink & canvas hanging shelves
Picture
Rear doors are lockable, and easily removed if necessary
Picture
Dinette converts to Double Bed
Picture
Headroom inside the camper is 190 cm (6' 2")
Picture
or Two Single Beds
Picture
Internal tie down points are located on each of the panels

TAIL FEATHER 8.0 
DIY KIT INCLUSIONS

10 x Wall Panels
(4 push out windows with insect screen)
(2 with fixed windows)

2 x Corner Panels

1 x fully insulated roof (2 piece) with: 
2 sky lights, 
2 roof vents and
2 LED lights

1 x Rear Door Assembly

2 x Doors
(with a fixed window in each)

Dinette that converts to a
1440 mm x 1870 mm double bed
Includes: 2 x Benches with under
seat storage, 1 x table & 
1 x cushion set

1 x Bench top with sink and faucet
(with under bench storage)

1 x Canvas hanging shelf

1 x floor liner

1 x Safety Strap

1 x Hardware Kit 
(screws, washers and 
roof tie down clips)

8 x curtain rods 
(curtains not included)



TAIL FEATHER 8.0 
OPTIONAL EXTRAS

Dinette that converts to two single
beds or one king size bed
Singles 580 mm x 1980 mm
King 1870 mm x 1980 mm
(Includes two single jump seats)

Inner spring mattress upgrade

Additional bench top
(without a sink)

Canvas hanging wardrobe

Outside rear or "L" shaped awning

Curtains

Sun Shields available on fixed windows

Marine Carpet

240 volt inlet (fitted by a qualified electrician)

Double power point

Fire Extinguisher

4 x Tie-Down Chains 
(Chain, turn-buckles & "D" Rings)

FLOOR PLANS

SEATING FLOOR PLAN

Picture
With the table in the up position, the camper can comfortably seat four adults. The table is free standing and can be easily removed for use outdoors.

SLEEPING FLOOR PLAN

Picture
The table legs are folded and the table is placed between the benches to make a 1440 mm wide by 1870 mm long bed.

SITE
Home
About
Features
Gallery
Support
Contact
Blog
SUPPORT
Trailer Specifications
Trailer FAQs
Assembly Instructions
Warranty
Picture
Authorised Australian Dealer: Micky Booth RV 
14 Eugene Terrace, Ringwood VIC 3134 | 0425 857 866 | [email protected] | mickyboothRV.com.au